日本真人做人爱456丨

<small id="gwakk"><samp id="gwakk"></samp></small>
  • <tr id="gwakk"></tr>
  • <code id="gwakk"></code>
    <code id="gwakk"><nav id="gwakk"></nav></code>
  • News
    Products Display
    • HDT5401THB-45/5 concrete boom pump truck for sale p
    • HDT5340THB-42/4 truck mounted concrete pump for sal
    • HDT5380THB-45/5 concrete boom pump truck for sale p
    • Mini Concrete Boom Pump Truck for Sale
    • HDT5291THB-37/39/4 Concrete Pump Truck
    Contact Us

    Email:april@concretebatchplant24.com

    Tel:+86-371-65621392

    Fax:+86-371-86616825

    News

    Solutions to hydraulic vibration of a concrete pump truck

      Reasons for hydraulic vibration of a concrete pump truck may lie in the hydraulic pump, hydraulic oil, overflow valve, pipe, electromagnet or mechanical structure. Solutions are as below.

      Hydraulic Pump: Intake air, the installation position is too high, the oil absorption resistance is large, the gear tooth shape accuracy is not enough, the blade is stuck and broken, the plunger is stuck and the movement is not flexible, and the parts wear make the gap too large.

      Method: Replace the inlet port seal, the height of the suction port nozzle to the pump suction port should be less than 500mm, ensure the diameter of the suction pipe, repair or replace the damaged parts.

      Hydraulic oil: the liquid level is too low, the suction pipe is inserted into the liquid surface depth is not enough, the viscosity of the oil is too large, and the filter is clogged

      Method: Refueling, long-term immersion of the suction pipe to the specified depth, replacement of suitable viscosity hydraulic oil, cleaning of the filter

      Overflow valve: the orifice is blocked, the clearance between the valve core and the valve seat is too large, and the spring is invalid.

      Method: Clean the damping hole, repair the gap between the valve core and the seat, and replace the spring
    concrete pump truck

      Other spools are not flexible

      Method: cleaning, deburring

      Pipe: The pipe is slender, there is no fixing device, and each other is hit. The suction pipe is too close to the return pipe.

      Method: refers to the installation of fixtures to expand the distance between the pipelines and the distance between the suction pipe and the return pipe

      Electromagnet: The electromagnet is poorly welded, the spring is too hard or damaged, and the spool is stuck in the valve body.

      Method: re-weld, replace the spring, clean and research the valve core and valve body

      Mechanical: The hydraulic pump and the motor coupling are not concentric or loose, there is impact when the moving parts stop, the reversing lacks damping, and the motor vibrates

      Method: keep the concentricity of the pump and the motor shaft not more than 0.1mm, use elastic coupling, fasten the dowel, set damping or buffer device, and balance the motor.

      These are reasons and solutions for hydraulic vibration of a concrete pump truck. Hope it’s helpful.

    Pre:How to deal with truck mounted concrete pump failures
    Next: None

    日本真人做人爱456丨
    <small id="gwakk"><samp id="gwakk"></samp></small>
  • <tr id="gwakk"></tr>
  • <code id="gwakk"></code>
    <code id="gwakk"><nav id="gwakk"></nav></code>